Top 10 best Atv Box Blade 2022 Price and Feature Comparison

I think you can save money by buying from the source directly. For people who think it is flimsy, I wonder if they assembled with correctly with the blade support. I wouldn’t try using it to lift stumps, but it works for leveling loose dirt and rocks behind my UTV.

Edit* after receiving a box with missing hardware the seller was quick to respond. They shipped out the missing pieces plus some additional parts.I finally had some time to install the plow system last weekend and am ready for the snow. It mounted up on my polaris sportsman 500ho just fine. I did have to drill two holes in the skid plate to get it to fit, but it was still an easy install. I would buy again.It comes with plenty of hardware to accommodate different mounting applications.All of the components are of good quality and fit together without issue.The directions were somewhat vague but easy enough to follow. It took me about 2.5 hours to complete.**Edit 2**It has been about a year since installed. It worked great last winter, and I just recently put it back on for this coming season.It did just fine with all of the snow last year. I only wish it was a foot or two wider. It takes many passes to get it all.One of the skids broke off, need to order another set.Some of the hardware had loosened up and needed to be retorqued.The paint held up well, even on my dirt road, no rust so far.Knowing what I know now, I would buy a larger plow, but for the price this one works fine.

I use this with a Honda rancher to maintain my hard pack drive and some forest access trails It’s a single point drag, not reeealy a grader. You will absolutely need to invest in a 2” box socket type hitch and I suggest you avoid adaptors that bolt to your hitch ball point. You can’t adjust the horizontal tilt relative to the rear tires to grade anything. You are limited to the grade your tires rest upon.You CAN work around this by dragging a lot of dirt/gravel from areas you want lower and directing the spil to areas you want higher. Because I t’s made well and cuts well and is heavy; you can pan the head so the excess spills out on the side you want built up and then re level the spill on a second pass with higher trim and less cut. Bam… single point grading.Also it is great for smoothing out existing work and patching rugs and wash on hard pack roads. Advise getting the cutting tines too they break the soil, add weight, and give you more to drag per pass and give the blade the ability to be trimmed for smoothing rather than digging. I bought the manual crank lift and other than needing to hop on and off and grease the fittings it works well too.For those who gripe about discovering they only got the plow… look at the price, read the description, and study how attachments work on all gear before shopping something that costs this much. Workers build attachment rigs to suit the job at hand and buy only what they need. It’s a specialist tool not an instapot.

Is ok for the money, however, no attachments pins at the end of the 3 points, it would make life easier. I improve in to it and it works, the up and down crank is a bit ackwquard , but it works for me, should be improve and reposition, more acssesible. Nevertheless, I give it a 4

Just what I’ve been looking for. Perfect for conditioning my dirt arena and my pastures. I was about to rent a tiller from home depot when I saw this on Amazon! Easy to assemble, easy to hook up to my lawn tractor. You’ll need to buy a clevis hitch if using lawn tractor tho. No problem pulling it. Cuts right through packed down dirt. Highly recommend.

Great product and great price. Fast shipping

The media could not be loaded.  This snow plow was surprisingly heavy. I could barely move the box by myself when it arrived. I’m very impressed with the quality and sturdiness of it so far. A few notes on installation:Assembly and Install:I mounted this snow plow onto a 2021 Polaris Sportsman 570 EPS. Assembly was not quick, it took about 2-3 hours for the plow assembly and another 2 hours to get it installed on the ATV. Plan for 4-5 hours.This unit can be assembled as either 48” or 60” wide. I chose the 48” width assembly as that’s about the width of the vehicle, anything wider is going to tear up landscaping on both sides of the sidewalk. The 48” width seems pretty manageable.The instructions aren’t great on how to mount the mount plate to the bottom of the ATV. Pictures are poor quality, so you just need to stare at it and figure it out. There are different configurations you can use. For the 21 Sportsman 570 installation, I mounted to the frame with three hex bolts and one U-bolt. I had to drill one new hole in the frame cross support to ensure a good, tight installation.Once getting the base plate mounted on the ATV, then attaching and detaching the plow from the vehicle is a matter of pulling 2 cotter pins and unhooking your winch.A winch works great to raise and lower the plow. I wouldn’t recommend using this unit if you don’t have a winch, there will be nothing to support it.One big watch out (not just with this plow( but all ATV plows) – watch your speed. You can bend the plow arms and mount up if you try to go too fast or push too much snow.

Arrived good easy install works great. I would not hesitate to recommend to a friend.I did not need an additional plate that ppl in forums suggest. Coincidently those ppl also sell the extra plate they suggest.Install was easy all parts there plus optional parts to install on a Polaris.I put it on a Massimo trail boss 550 2022 and first snow was over 2 ft no problems.

It’s durable and sturdy but just wasn’t happy about no paperwork or information to assemble or use.